The GA 37 compressor shuts down with element outlet temperature going high. What is the solution?
_____________________
Overheating
Quite simple, its overheating, check oil level, clean/blow out cooler, check/replace thermo valve.
Make sure fan is spinning.
Do all above, if no change then post a reply to this message
Kind Regards
Carl
______________________
GA 37 Shut down
Thank you Carl. We will try that
_______________________
GA 37 advice
if your compressor overheats within seconds of starting, your problem is oil stop valve
if it takes a few minutes or longer to over heat it is likely low on oil, coolers are plugged, or your thermostat valve is sticking
to determine if thermostat valve is working, feel the fittings leading into and out of the oil cooler when unit is running hot, both should feel hot, if one feels close to ambient temp your thermostat valve needs to be replaced or bypassed
____________________
GA37 shuts down on element outlet
Element outlet alarm could be oil leakages leading to low oil level and consequently leading to high temperatures. Leakages have to be fixed.
New comment? New question? Please add it here, along with photos, to help others help you with your compressor and equipment problem!